Zoom Modem/Router Combo

1. Log into your Zoom's management interface. This is normally done by going to http://10.0.0.2 in your web browser. The default username is "admin" and the password is "zoomadsl"
2. To setup the router for VCI's DSL service fill in the following settings:
   1. Ensure the VPI is set to 0
   2. Ensure the VCI is set to 35
   3. Ensure the Encapsulation is set to "PPPoE LLC" as shown below.
   4. Bridge should be disabled.
   5. Enter your email address into the "Username" field.
   6. Enter your VCI password into the "Password" field.
   7. Ensure "Automatic Reconnect" is checked.
   8. All other options should be as shown below.
3. Click "Write Settings to Flash and Reboot" to save the setting and reboot the router. When the router restarts it should automatically connect.